Numbers & alphabets in IP Ratings explained.
What does IP rating stand for and what it means?
IP ratings in electrical enclosures stand for International Protection Rating, sometimes it can be interpreted as ingress protection rating are constituted by the letter I & P followed by two digits and sometimes an optional letter to decide its ingress protection from solids or liquids. According to the international standard IEC 60529, the digits & letter represents and classifies the degree of protection for electrical enclosure in term of intrusion or ingress of solid objects (this also includes human body parts such as hands and fingers), dust, accidental contact of the people using the equipment, and fluid (rainwater, hazardous fluids, corrosive fluids.) IP ratings aim to give the users more detailed information about these enclosures to give the accuracy of the protection it gives and not be totally ambiguous by just using the terms”waterproof” or “rust-resistant.”
The numerals or digits generally determines the degree of ingress protection an IP rating provides, summarised below. Let’s take an electrical socket for an example, if it is rated as an IP22 socket then it means that this is protected from intrusion of human fingers and this will no get damaged or become unsafe during a stress test in which it is subjected to vertically dripping water. With this in mind, the least requirements for electrical accessories used for indoors is IP22 or 2X. Please note that in some cases, the IP ratings can also be followed by an alphabet letter.
The First Digit(Level of Intrusion or Ingress Protection)
To summarize the definition of the first digit:
Level 0: no protection provided for any ingress of any foreign objects
Level 1: means there is no special protection provided
Level 2: means there is a provided protection for large human body parts such as hand, but there is an exception to the rule. #2 means there is no protection from a deliberate access to the equipment. This digit means that there is an ingress protection from objects which are greater than 50mm in diameter, human fingers and objects which are not longer than 80mm and larger than 12 mm in diameter.
Level 3: this level provides protection from entries by any equipment tools or wires provided that it has
Level 4: this provides which level 3 cannot give, which is protection from any solid objects which is larger than 1 mm, this includes fine and small tools.
Level 5: protects the equipment from dust ingress
Level 6: when equipment is on level6, this means that it is totally sealed-tight and any dust cannot enter the enclosure.
Second Digit (Level of Liquid Ingress Protection)
Level 0: This means no protection from any fluid ingress.
Level 1: provides protection from any liquid condensation such as dripping water or vertically falling drops will have no any adverse or harmful effects
Level 2: It gives protection from any liquid droplets if the position of the electrical enclosure is deviated from its normal position up to 15° vertically.
Level 3: It gives protection from any spraying water if the position of the electrical enclosure is deviated from its normal position up to 60° vertically.
Level 4: It gives protection from any splashing water from all directions and any angle – it will have not any harmful effects
Level 5: It gives protection from water splashing projected from any nozzle (6.3mm) from all directions and any angle – it will have not any harmful effects
Level 6: It gives protection from powerful jets (12.5mm nozzle) projected from all directions and any angle – it will have not any harmful effects on the electrical enclosure.
Level 7: it provides protection from water submersion but only up to 1 meter only.
Level 8: it provides protection from water submersion beyond 1 meter. This makes the enclosure submersible in water, the specifications of the equipment should be specifically stated by the manufacturer. Under normal circumstances, this means that the enclosure is hermetically sealed during its manufacturing process. It’s important to note that with certain types of electrical enclosures or equipment, water can enter but in a way that it will not produce harmful effects on the electrical equipment housed inside the enclosure.
Additional letters that represent more qualities:
F: means the equipment or enclosure is oil resistant
H: means it is a high voltage equipment or device
M: means equipment or device moves during a water stress test
S: means equipment or device standing still during a water stress test
W: means equipment or enclosure fits certain weather conditions